Installation Material
No products found
Oops! We couldn't find any products that match your criteria. Please adjust your criteria.
Different Mounting Methods for LED Panels
LED panels can be mounted in various ways. The choice of installation material depends on the type of ceiling and the desired mounting method: surface-mounted, recessed, or suspended. Below is an overview of the most common methods and the corresponding materials.
Using a Surface Mount Frame for LED Panels
A surface mount frame offers a solution when recessed installation in the ceiling is not possible, for example, with a concrete ceiling. The surface mount frame creates a housing in which the LED panel is placed, allowing the panel to sit on the ceiling. This results in a neat and clean finish.
Steps for mounting with a surface mount frame:
- Attach the sides of the surface mount frame to the ceiling.
- Slide the LED panel into the frame, often through the open side that is mounted last.
- Connect the LED driver.
- Attach the last side of the frame.
Suspending LED Panels with a Suspension System
A suspension system, also known as a suspension kit or pendant kit, is used to hang LED panels from the ceiling. This creates a floating effect and is a great choice for rooms with high ceilings or when a modern, open look is desired. The cables are adjustable in length to achieve the desired height.
| Component | Function |
|---|---|
| Ceiling mounts | To anchor the cables to the ceiling. |
| Steel cables | For actually suspending the panel. |
| Panel attachments | To attach the cables to the LED panel. |
| Adjustment screws | For adjusting the height. |
Recessing LED Panels in a Suspended Ceiling
The most common and often simplest installation method for LED panels is recessing them into a suspended ceiling (also known as a drop ceiling with T-grid profiles). LED panels are typically directly interchangeable with existing suspended ceiling tiles of the same dimensions. In this case, no additional installation material is often needed, as the panel fits directly into the grid opening.
Key points for recessing in a suspended ceiling:
- Check the dimensions of the LED panel and the opening in the suspended ceiling. Standard sizes are 60x60 cm, 30x120 cm, and 60x120 cm.
- The LED driver is placed above the panel, on the suspended ceiling grid.
Recessed Frame for LED Panels in Plasterboard Ceilings
When an LED panel needs to be recessed into a plasterboard or other solid ceiling, a special recessed frame is required. This frame is placed in a cut-out opening in the ceiling and provides a neat, flush edge finish.
Mounting with a recessed frame for plasterboard:
- Cut an opening in the ceiling according to the dimensions of the recessed frame.
- Place the recessed frame in the opening and secure it firmly.
- Slide the LED panel into the recessed frame.
- Connect the LED driver.
Considerations When Choosing Installation Material
The right choice of installation material for your LED panels contributes to a long lifespan and safe installation. Pay attention to the following points:
- Compatibility: Always check if the installation material is compatible with the dimensions of your specific LED panel. Not all systems are universal.
- Quality and Durability: Choose materials that are sturdy and durable, so they can support the weight of the panel and withstand any environmental factors (for example, moisture in a bathroom, for which the IP rating of the panel is also important).
- Electrical Safety: Ensure the power is turned off before starting the installation. If in doubt about the electrical connection, it is advised to hire a qualified electrician.
- LED Driver: The LED driver, which converts the mains voltage to the correct voltage for the LED panel, is a crucial component. It is usually supplied with the LED panel, but its placement (above the ceiling or in the surface mount frame) depends on the chosen installation method.
Which Installation Material is Right for Your LED Panel?
The choice of installation material for your LED panels depends on the situation and your preferences. It is important to determine which method is suitable for your ceiling and the desired look before purchasing. For a flat and clean result in a suspended ceiling, direct recessing is sufficient. For other ceiling types, surface mount frames and suspension systems offer suitable solutions, each with its own advantages for mounting and appearance. For technical questions, always consult the product specifications or an expert.